RS485 to Ethernet Converter

Includes a US plug power adapter. Need a different standard? Check out our US and EU options.

Overview

The RS485 TO ETH module offers a seamless way to bridge communications between RS485 and RJ45 Ethernet ports. Setup is a breeze thanks to its intuitive, web-based configuration page.

Features

• Powered by a high-performance 32-bit ARM Cortex-M0 processor for lightning-fast speeds and outstanding efficiency
• 10/100M Auto-MDI/MDIX Ethernet port—works seamlessly with both crossover and straight-through cables
• Adjustable RS485 baud rate (600bps~230.4Kbps) with five parity options: None, Odd, Even, Mark, and Space
• Multiple operating modes: TCP Server, TCP Client, UDP Server, UDP Client, and HTTPD Client (supports GET and POST requests)
• Flexible configuration options: Set up via webpage, AT commands, serial protocol, or network protocol. Includes a ready-to-integrate configuration protocol for your custom software
• Supports custom heartbeat packets to verify connection integrity and actively poll sensor data
• Supports custom registration packets—automatically sends device IDs upon connection to easily identify and manage multiple devices
• Customizable web interface—tailor the built-in configuration page to match your needs
• Supports RFC2217-like protocols, allowing real-time adjustment of serial parameters (baud rate, data bits, etc.) on the fly
• Built-in KeepAlive mechanism detects dropped connections and automatically reconnects
• Supports timeout reboot (reboots when no data is detected) to guarantee long-term system stability, with customizable reboot times
• Supports DNS domain name resolution with a customizable DNS server
• Supports DHCP for hassle-free automatic IP allocation, or set a static IP manually
• Easily upgrade firmware directly over the network
• Reset to factory defaults via software or physical hardware pin
• Shipped with a unique default MAC address that can be fully customized
• Bundled utilities included: configuration software, TCP/UDP testing tool, and VCOM virtual serial port software
• Developer-friendly: Includes example code for host computers (socket), VB, C++, Delphi, Android, iOS, and more

Specifications

• Ethernet:
  • Connector: 4-pin RJ45
  • Communication rate: 10/100Mbps
  • Interface protection: 1.5KV electromagnetic isolation
  • Protocols: IP, TCP, UDP, ARP, ICMP, DHCP, DNS, HTTPD Client
  • TX cache: 6Kbyte
  • RX cache: 4Kbyte
• RS485:
  • Connector: screw terminal (A+, B-, GND)
  • Data bit: 5bit, 6bit, 7bit, 8bit
  • Stop bit: 1, 2
  • Parity bit: None, Odd, Even, Mark, Space
  • Baudrate: 600bps~230.4Kbps
  • RX cache: 800byte
  • Hardware flow control: none
  • Interface protection:
    • 2KV ESD protection
    • RS485 pull up/down registers: 2.2KΩ
• Power:
  • Power supply: 5.0~7.0V (5V recommended)
  • Operating current: 150mA (@5V)
  • Power consumption: <1W
  • Interface protection: reverse-polarity protection, ESD protection, and surge protection
• Environment:
  • Operating temperature: -25~75°C
  • Storage temperature: -40~105°C

Dimensions